User-friendly Design

• This unit integrates the functions of a CO₂ incubator and a shaking incubator, featuring small footprint and large flask capacity.
• A large color touchscreen displays all parameters on a single page. The menu-based interface is simple and easy to operate.
• Built-in password lock prevents accidental operation, and a timing function is available.
• The inner chamber, shaking platform and shelves are made of 304 stainless steel with rounded corners. The electrochemically treated inner wall delivers excellent corrosion resistance and inhibits bacterial growth, ensuring long service life and easy cleaning and disinfection.
• A variety of dedicated racks and clamps are optional and easy to replace, greatly improving work efficiency.
  
• 
  

CO₂ Monitoring & Control System

• Adopts imported infrared (IR) CO₂ sensor with stable performance and long service life.
• The IR sensor is highly sensitive to CO₂ concentration changes and free from interference from internal temperature and humidity fluctuations.
• Fast CO₂ recovery: After the door is kept open for 30 seconds and then closed, the CO₂ level returns to the preset 5% within 3 minutes, enabling rapid stabilization and uniform distribution of CO₂ inside the chamber.
  
• 
  

O₂ Concentration Control (Optional)

• Equipped with zirconia O₂ sensor featuring good linearity and long service life for precise and stable O₂ control.
• O₂ control range: 1% to 90%, suitable for hyperoxic, hypoxic and microaerobic culture.
  
• 
  

Semiconductor Refrigeration (Peltier)

• Adopting Peltier semiconductor refrigeration technology, it achieves high cooling efficiency and remarkable energy saving. Its power consumption is reduced by over 85% compared with compressor refrigeration.
  
• 
  

Temperature Control System

• High-precision Pt100 temperature sensors guarantee accurate internal temperature.
• Six-sided heating prevents condensation inside the chamber and avoids culture contamination caused by bacteria.
• An independent ambient temperature monitor automatically adjusts the heating system according to ambient temperature changes to prevent temperature overshoot.
• A transparent inner glass door facilitates experimental observation. A linked door switch is installed on the cabinet behind the glass door.
  
• 
  

Humidity Control

• The built-in humidity control system maintains precise and stable humidity inside the chamber.
  
• 
  

Anti-contamination Control 90°C High-Temperature & High-Humidity Sterilization System

• It performs thorough sterilization for the entire chamber, including temperature sensors, CO₂ sensors, fans, shelves and brackets. It eliminates bacteria, fungi, mycoplasma and other microorganisms to provide a safe experimental environment.
• One-touch button enables one-click sterilization.
  
• 
  

HEPA Filter

• Standard built-in HEPA filter effectively removes airborne bacteria and dust particles to keep the chamber clean.
• Real-time filter life display on the control panel for easy status monitoring.
  
• 
  

Microbial Filter

• A microbial filter is fitted at the CO₂ inlet. It achieves a filtration efficiency of 99.99% for particles ≥ 0.3μm, effectively removing bacteria and dust from incoming CO₂ gas.
  
• 
  

Triple Eccentric Shaft Balance Drive

• The triple eccentric shaft balance drive ensures all samples on the shaking tray run at a consistent speed.
• The robust load-bearing structure delivers powerful performance even under full load and high-speed operation.
  
• 
  

Continuous Operation Performance

• Equipped with low-heat DC motor featuring high starting torque, wide speed range and maintenance-free design. It solves the problem of poor long-duration continuous operation of conventional domestic shakers.
  
• 
  

Safety Functions

• Alarms for abnormal high/low temperature, speed and overtemperature, as well as abnormal CO₂ concentration.
• Reminders for long door opening and UV sterilization status.
• Air circulation, heating and shaking automatically stop when the door is opened to avoid temperature overshoot.
• Exclusive speed control circuit ensures smooth start-up of the shaker and prevents liquid splashing and equipment damage.
• Independent over-limit temperature alarm system cuts off heating automatically to ensure safe operation.
• Optional RS-485 and USB data export interfaces for real-time monitoring of temperature, speed, runtime and alarms via computer.
  
• 
  

Data Recording & Fault Diagnosis

• All data can be downloaded to a computer via RS485 port for storage. Historical data can be retrieved for quick fault diagnosis.
  
• 
  

Hierarchical Access Management

• Three user access levels are available: Administrator, Operator and Guest.
• Equipped with data storage function and optional USB interface for data export.
  
• 
  

Electronic Signature Function (Optional)

• Supports real-time electronic signature based on current user login information. Printed documents show device ID, timestamp and other details.
  
• 
  

Smart APP Control System (Optional)

• Fault signals are instantly pushed to the mobile APP for timely troubleshooting, minimizing experimental losses.
• Users can remotely check equipment operating status anytime and anywhere to improve overall utilization efficiency.